Lift Chair Table

My computer chair wont lift anymore and wont stay still to my desired height. I dont want to junk it because the cushion is still good and comfy but it just goes down and down and down until I realized I am already below the height of the table. Can somebody suggest how to fix it or any remedy at all?

Google : chair gas cylinder cartridge
Here is one that I found, you may find a cheaper source if you look.
http://www.swivel-chair-parts.com/GasCyl inder.html
With some effort, you will find the part. It can be installed yourself with basic tools.

2008-09-24 05:25:41 by Rodolfo Jr. P

Demo

my mother 88 years old and frail is very small and the lift cushion that she use's to sit and stand from her chair at the dining room table is to big for her. It is made for a 300 lb person and I can't find a smaller one or a child size.

your local pharmacy should be able to help you. they would have names of manufacturers for the products they sell and one of them should be able to help you even if it means special ordering it.

2006-05-03 17:27:41 by alandw

Price: $308.99 $172.97

Right or left positioning with 180� rotation so that the chair can be placed by any wall.
Table top pivots 360� at the touch of a hand.
Can be used for many activities such as eating, writing, crafts, working on the computer, reading and games.

it looks easy on the movies but i tried it and i couldn't do it. do i have to lift her up? does she have to do some of it herself?

you should pull it out for her, and hold the back of the chair gently pushing as SHE pulls the chair under the table, but she should be assisting you

2008-01-01 21:32:11 by Razgriz01

My 8month old king charles pup has suddenly started to lift his leg inside, on the sofas, legs of chairs/tables etc! It's so strange, because he is fully house-trained. And he doesn't need to go to the toilet, he just does little tiny pees all over the place! Help!

He is starting to mark his territory. If you don't plan to use him for stud purposes I'd have him fixed. Hopefully you're not to late and the peeing will stop.

2009-04-03 02:48:35 by Hannah

I have bought a brand new dining room table and chairs, but the two end chairs with the armrests are about an inch and a half too high to slide underneath the table. I have seen a lot of different types of furniture lifts and caster, but they are either too big or poor quality. I need something that is about 1 1/2" in diameter and 1 1/2" high. It needs to be something that the table legs cannot slip off. Does anyone have any ideas?

A couple ideas. Add a piece of wood the same size and shape as the bottom of the leg to the bottom of the leg screwing it in place with a counter sunk screw. If the table legs skrew off add a piece of wood here, skrewed to the table top then attach the legs onto it. Good luck.
Find identical flat paper weights and slide them under the legs or somethig else flat solid and identical in shape and color. Have a marble or granite counter top company cut you some identical pieces from scrap to do the job.

2006-08-13 18:00:04 by mullinsbrendan